Filter
Top Products
2
Main Features
bX30 optical zoom
bHigh speed 360 degrees rotation mechanism
b-5 to 185 degrees tilting angle
bEasy installation and removal
Providing clearer monitored images
• Detailed surveillance options including auto focus, auto iris, white
balance, backlight/profile compensation, electronic shutter and
AGC
• DAY/NIGHT function enabling 24-hour surveillance
• Up to 128 preset positions and 4 preset position groups are
supported
• Up to 8 camera view setting files can be saved for storing camera
setting patterns
Three types of auto mode settings
1 SEQUENCE mode
In this mode, surveillance locations can automatically be moved
to multiple preset positions sequentially.
2 AUTO PAN mode
Automatic pan between two surveillance locations in loop can be
set after storing start and end locations.
3 TOUR mode
Sequential manual operations such as panning, tilting and
zooming can be saved as a movement track, and the movement
track can be used to automatically repeat the set of camera
operations.
Alarm detection function
• Both built-in and externally connected motion sensors can be
used simultaneously.
• Detailed input/output options for alarm signals are available for
linking external devices such as recorder and alarm buzzer.
Protecting privacy and ensuring security
• Masking patterns can be placed over defined image areas to
protect privacy.
• Password authorization can be set for camera operation.
Additional convenient functions
• Automatic image flipping (AUTO FLIP) function allows you to view
the surveillance image in an upright position when the camera is
tilted beyond the straight down position and the on-screen image
is inverted.
• The automatic cleaning function keeps horizontal rotation of the
camera in smooth working order.
• The MIRRORING function enables surveillance from the camera
set up on the floor.
Supported protocols: SSP, HSSP, Pelco-D, Pelco-C
Memo: To operate the camera, the separately sold Power Board Unit
<VA-84S (for AC24V) or VA-80S (for AC230V)> is required.
The power board unit can be removed easily from the camera
unit by using the releasing levers.
The following parts are expendable items. Be sure to replace them
after their work life has expired. Component performance cannot be
guaranteed when parts are used to the very end of their projected
work life. Durability will differ according to environmental conditions
and usage.
• Lens unit: about 20,000 hours (Motor: 1,200,000 operations)
• Slip ring: about 20,000 hours (1,200,000 rotations)
• Motor: about 33,000 hours (12,000,000 revolutions)
• Fan: about 30,000 hours
• Clamping core (large) x 2 (square type)
• Clamping core (small) x 1 (round type)
For installing the core, refer to the supplied installation manual.
Expendable items Accessories
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 2 ページ ２００７年１月１８日 木曜日 午前９時４４分