Filter
Top Products
Pan and Tilt Settings (PAN/TILT)
31
The proportional function allows you to make the amount of
movement in the screen constant by changing pan/tilt operation
speed during manual operation according to the zoom
magnification power.
1
Use the joystick lever (xy) to select
[PROPORTIONAL] and use the lever (vw) to select
“ON”.
Available settings:
•OFF: Disables the proportional function.
•ON: Enables the proportional function.
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
While the surveillance location moves by the Sequence mode or
manual preset (PRESET GO) operations, the freeze function
displays the still image immediately before the camera starts
moving. After movement of the surveillance location completes,
the still image is switched to the video image of the new
surveillance location.
1
Use the joystick lever (xy) to select [FREEZE] and
use the lever (vw) to select “ON”.
Available settings:
•OFF: Disables the freeze function.
•ON: Enables the freeze function.
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
When you install the camera and the starting point (0 degrees)
angle information for the camera needs to be specified, set the
angle information using the following procedure. You can set
any direction as the starting point (0 degrees) indicating north
direction.
1
Use the joystick lever to orient the camera in the
direction you want to set as the starting point.
2
Use the joystick lever (xy) to select [SET NORTH],
use the lever (vw) to select “SET”, and press the
[ENTER] button.
When “SET” in the [SET NORTH] menu item changes to “ON”,
the starting point (0 degrees) setting completes.
Available settings:
•OFF: Does not set the starting point angle information.
•ON: Sets the starting point angle information.
•SET: Setting operation is in progress. Determine the
camera’s orientation, then press the [ENTER] button.
This completes the setting and “SET” changes to
“ON”.
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
B
Making the amount of movement in the
screen constant (PROPORTIONAL)
C
Displaying a still image while switching
the surveillance location (FREEZE)
PAN/TILT SETTING
PRESET POSITION y
PROPORTIONAL
FREEZE
SET NORTH
TILT LIMIT
PRESET
MENU
SET
ON
OFF
OFF
OFF
OFF
BACK
y
PAN/TILT SETTING
PRESET POSITION
PROPORTIONAL
FREEZE
SET NORTH
TILT LIMIT
PRESET
MENU
SET
ON
ON
OFF
OFF
OFF
BACK
D
Setting the starting point (0 degrees)
angle information (SET NORTH)
• The camera rotates clockwise. North is regarded as 0
degrees. For example, 90 degrees represent east.
• To display the camera’s angle information, set
[DIRECTION] in the DISPLAY screen under the
INFORMATION screen to “ON”.
y
PAN/TILT SETTING
PRESET POSITION
PROPORTIONAL
FREEZE
SET NORTH
TILT LIMIT
PRESET
MENU
SET
ON
OFF
ON
OFF
OFF
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 31 ページ ２００７年１月１８日 木曜日 午前９時４４分