Sanyo VPC-J1EX Digital Camera User Manual


 
ISO SENSITIVITY SETTING
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2
Select the desired ISO sensitivity
setting from the ISO sensitivity
menu.
Ä: Sets the ISO sensitivity
automatically (equivalent to
ISO50 to 200 [video clip shooting
mode: ISO200 to 800]).
5: Sets the sensitivity to ISO50
equivalent (still image and
sequential shots shooting modes
only).
+: Sets the sensitivity to ISO100 equivalent (still image and sequential
shots shooting modes only).
1: Sets the sensitivity to ISO200 equivalent.
%: Sets the sensitivity to ISO400 equivalent.
?: Sets the sensitivity to ISO800 equivalent (video clip shooting mode
only).
D: Sets the sensitivity to ISO1600 equivalent (video clip shooting
mode only).
3
Press the SET button.
œ This completes the ISO sensitivity
setting.
HINT
œ By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
12
ISO
AUTO
<Example: Still image shooting
mode>
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
English
108