Filter
Top Products
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1
Set the camera to the EXPERT
shooting mode (see page 94), and
exit the Shooting Setting Screen or
Shooting Information Screen (see
page 115).
œ Press the MENU button to exit the
Shooting Setting Screen or Shooting
Information Screen.
2
Press [Â] or [Ã] on the arrow
button.
œ The exposure correction bar appears.
œ At this point, you can press [Â] or
[Ã] on the arrow button to adjust the
exposure.
HINT
œ Exposure correction setting is canceled in the following cases:
When the pointer is set to the center position.
After the shooting mode is changed.
When the BASIC mode is set.
When the selector dial is set to [Ô].
When the camera is set to the playback mode, the PC camera mode, or
the PC connection mode.
After the power is turned off.
œ The exposure setting numerical value is shown at the left end of the
exposure bar. The exposure can be set to a value from –1.8EV to +1.8EV
(AE shift sequential: the standard exposure can be set within a range of
–0.6EV to +0.6EV).
œ While exposure correction is active, the accessing indicator in the
viewfinder flashes green.
œ You can also correct the exposure by selecting the exposure correction
icon Ê on the Shooting Setting Screen.
12
Darker Lighter
Pointer
Exposure correction bar
Exposure correction setting
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
111
English