Filter
Top Products
12
12
12
2.8
1/30
Target mark
Focus icon
(Press halfway)
(Press fully)
CAPTURING STILL IMAGES
1
Set the camera to the still image
shooting mode (see page 41).
2
Press the shutter release button to
take the picture.
1
Point the camera lens at the
subject. Slowly press and hold the
shutter release button halfway.
œ The target mark [ê] or the focus
icon [ë] (focus-lock) appears in
the LCD monitor.
œ If the Shooting Setting Screen
(see pages 51, 94) or Shooting
Information Screen (see page
115) was displayed, it is exited.
2
Press the shutter release button all
the way.
œ The image is captured.
œ The illumination light remains lit
for about 1 second after the
image is captured (see page 143).
NOTE
About the focus icon and target mark
œ The target mark outlines the area that the camera is using to focus. If the
area outlined by the target mark is not the subject you want to focus on,
then refocus your subject, for example by changing the shooting angle.
œ The target mark does not appear in the following situations.
When the subject is not in focus
When using the self-timer to take a picture (see page 63)
When the focus is set to spot focus (see page 104)
When the focus is set to focus range # or $ (see page 103)
œ When the camera focuses on a wide area of the central part of the screen,
a large target mark appears.
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
English
42