Filter
Top Products
User’s Manual >>
19
Inserting and Removing the SD Card
(Optional Accessory)
The digital camera comes with approx. 10 MB of internal memory, allowing you to
store captured still images or movie clips in the digital camera. However, you can
also expand the memory capacity by using an optional SD card so that you can
store more files. We recommend using sandisk, Panasonic or Toshiba brand SD
cards up to 1GB memory size.
Inserting the SD card
1. Open the battery/SD card cover.
2. Insert the SD card in the correct orientation
shown.
Orient the SD card so the contacts face
the rear and the cut-off corner faces the
bottom of the camera. Insert the card
as far as it can go until it ‘clicks’. Do not
use force3. Close the battery /SD card
cover.
Removing the SD card
Open the battery/SD card cover, press lightly on the edge of the SD card and it
will eject.
To prevent valuable data from being
accidentally erased from an SD card
you can slide the write-protected
tab (on the side of the SD card) to
“LOCK”.
To save, edit or erase data on an SD
card, you must unlock the card.
Be sure to format an SD card with this digital camera before using it.
Refer to section in this manual titled “Formatting the SD Card or Internal
Memory” for further details.
Before inserting or removing the SD card, make sure that the power of
the camera is off. The camera will automatically turn off when inserting
or removing the SD card.