Filter
Top Products
Digital Camera >>
76
Shooting
Solution
Recharge or use the AC
power adapter/charger.
Turn the power on.
Slide the mode switch to
shooting mode.
Press the shutter button all
the way.
Load a new card, or delete
unwanted files.
Load a new memory card.
Wait until the status LED off.
Format the memory card in
this camera before its first
use or when it was used
other than this camera.
Turn the power on again.
Remove the
write-protection.
Turn the power on.
Adjust the brightness of
the LCD monitor in the
photography or playback
menu.
Wipe clean with a soft, dry
cloth or lens paper.
Get your subject within the
effective focus range.
Switch camera to infinity
[ ] focus. All subjects
beyond 50cm (25ft) will be
in focus.
Symptom
Even if I press the
shutter button, the
camera does not
shoot.
Images do not appear
on the LCD monitor.
Although it is set to
Auto Focus, it does
not focus.
Cause
The battery is running low.
The power is not on.
The camera is not in
shooting mode.
The shutter button is not
pressed all the way.
The memory card does not
have any free space.
End of memory card life.
The flash is recharging.
The memory card is
unrecognized by the camera.
The auto power off function
is activated.
The memory card is write-
protected.
The power is not on.
The LCD monitor is dark.
The lens is dirty.
The distance to the subject
is smaller than the effective
range.
There is insufficient light or
contrast for the camera to
focus on the subject.