Filter
Top Products
32
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB05BAS.fm
HDR-FX7E
2-887-515-14(1)
z Tip
• The focal distance information (for when it is
dark and hard to adjust the focus) appears for
about 3 seconds in the following cases. (It will
not be displayed correctly if you are using a
conversion lens (optional)).
– When the focus mode is switched from
automatic to manual.
– When you rotate the focus ring.
During standby, press the EXPANDED
FOCUS button B.
[EXPANDED FOCUS] appears and the
center of the screen is magnified by about 2
times. It will be easier to confirm the focus
setting during manual focusing. The screen
returns to the original size when you push
the button again.
b Note
• The image returns to the original size when you
press the REC START/STOP button or the
PHOTO/EXPANDED FOCUS button.
z Tip
• You can select the type of a picture on
EXPANDED FOCUS ([EXP.FOCUS TYPE]
p. 63).
You can adjust the brightness of a picture
with the EXPOSURE/IRIS dial G.
You can assign any one of [EXPOSURE]
(the default setting), [IRIS] and [AE
SHIFT] to the EXPOSURE/IRIS dial G
from the menu (p. 56).
z Tips
• Even if you open the aperture more than F2.8
(i.e. make the iris value smaller, such as F1.6)
during camera EXPOSURE/IRIS setting,
changing the zoom from wide to telephoto will
change the iris to F2.8.
• When the EXPOSURE/IRIS dial is set to
[EXPOSURE], appears next to the values
that can be set with the EXPOSURE/IRIS dial.
x EXPOSURE (the default setting)
You can adjust the display brightness by
adjusting the iris and gain (the shutter
speed remains fixed).
The iris, gain and shutter speed are
displayed on the screen.
b Note
• The GAIN button and the SHUTTER SPEED
button are inactive.
z Tip
• This is handy for changing the brightness of the
screen and setting the desired brightness by dial
operation.
x IRIS
You can manually adjust the light volume
of the light entering the lens between F1.6
and F11 or close the aperture.
As the iris is opened (smaller aperture
values), the light volume increases or the
iris is closed (larger aperture values), the
light volume decreases. The current
aperture value (F) appears on the screen.
To use the expanded focus
(Expanded focus)
Adjusting the EXPOSURE/IRIS
H
G
F
ED
C
B
A
F2.4 0
dB
60
F2.8
Changing the settings of your camcorder recordings (Continued)