Filter
Top Products
63
HDR-FX7E
2-887-515-14(1)
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB06MEN.fm
Using the Menu
This item is useful when you adjust
exposure. You can adjust EXPOSURE/
IRIS while checking [HISTOGRAM]
window (p. 32). [HISTOGRAM] will not
be recorded on a tape or “Memory Stick
Duo.”
z Tips
• The left area on the graph shows the darker
areas of the picture while the right area shows
the brighter areas.
• If you set ZEBRA to [70] or [100], the guide is
displayed (p. 34).
When you set [ON/OFF] to [ON], you can
display [CENTER] and [GUIDEFRAME]
markers.
x ON/OFF
When you select [ON], a marker is
displayed (the default setting is [OFF]). The
marker is not recorded.
x CENTER
When you set [CENTER] to [ON], the
marker is displayed at the center of the
screen (the default setting is [ON]).
x GUIDEFRAME
When you set [GUIDEFRAME] to [ON],
the marker for checking the horizontal and
vertical positions of the subject is displayed
(the default setting is [OFF]).
b Note
• Screen indicators are not output from the analog
jacks when a marker is displayed.
z Tips
• You can display the center marker and the
guideframe marker at the same time.
• You can obtain a balanced composition by
positioning the subject at the cross points of the
guideframe marker.
• Markers are displayed only on the LCD panel
and viewfinder (they are not output from the
jacks).
You can set a type of the expanded focus
display.
BTYPE 1
Simply enlarges images.
TYPE 2
Enlarges and shows images in white and
black.
When you set [CAM DATA DSP] to [ON],
the iris, shutter speed, and gain settings are
constantly displayed (the default setting is
[OFF]).
z Tips
• When set to manual, the values are displayed
regardless of the camera data display settings.
• indicates auto settings.
MARKER
80
BrighterDarker
Brightness
Pixels
EXP.FOCUS TYPE
CAM DATA DSP (Camera data
display)
120
min
Iris value
Gain value
Shutter speed
Continued ,