Filter
Top Products
46
HDR-FX7E
2-887-515-14(1)
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB05BAS.fm
Locating a scene on a tape
b Note
• See page 120 for details on how to use the
Remote Commander.
1 During playback, press ZERO
SET MEMORY 4 at a point you
want to locate later on.
The tape counter is reset to “0:00:00”
and appears on the screen.
If the tape counter is not displayed,
press DISPLAY 7.
2 Press STOP 6 when you want to
stop playback.
3 Press mREW 3.
The tape stops automatically when the
tape counter reaches “0:00:00.”
The tape counter returns to the time
code display, and the zero set memory
display disappears.
4 Press PLAY 5.
Playback starts from the point
designated “0:00:00” on the tape
counter.
To cancel the operation
Press ZERO SET MEMORY 4 again
before rewinding.
b Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
You can locate the point where the
recording date changes.
1 Set the POWER switch to VCR.
2 Press SEARCH M. 1 on the
Remote Commander repeatedly
to select [DATE SEARCH].
Searching quickly for a desired
scene (Zero set memory)
6
7
1
2
3
4
5
0:00:0060min
Searching for a scene by date of
recording (Date search)