Filter
Top Products
40
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB05BAS.fm
HDR-FX7E
2-887-515-14(1)
1 Press the MENU button A.
2 Select the (OTHERS) t
[ASSIGN BTN] by the SEL/PUSH
EXEC dial B.
3 Select the number of the ASSIGN
button (ASSIGN 1-6, [SHOT
TRANS]) you want to assign the
function by turning the SEL/PUSH
EXEC dial B, then press the dial.
• [------] is displayed at the number that no
function is assigned.
• When you select [SHOT TRANS], select
[YES], then proceed to step 6.
4 Select the function to be assigned
by turning the SEL/PUSH EXEC
dial B, then press the dial.
5 Select [OK] by turning the SEL/
PUSH EXEC dial B, then press
the dial.
6 Press the MENU button A to hide
the menu.
z Tips
• Shot transition is assigned to the ASSIGN
buttons 1, 2 and 3 (p. 42). Cancel the shot
transition assignment to return to the pre-setting
assignment.
• To cancel the shot transition, select [SHOT
TRANS] t [YES] in step 3.
b Note
• [FOCUS INFNTY] is only available during the
manual focus. It is not available during the auto
focus.
1 Assign [FOCUS INFNTY] to one of
the ASSIGN buttons (p. 39).
2 Press the ASSIGN button
assigned to [FOCUS INFNTY].
appears.
If you release the switch, it returns to
manual focusing.
Use this function to record a distant
subject when the focus is automatically
set on a close subject.
A
B
ASSIGN button 1-3
ASSIGN button 4-6
Focusing on a distant subject
(Focus infinity)
Assigning the functions to the ASSIGN buttons (Continued)