Sony 2-887-515-14(1) Camcorder User Manual


 
58
HDR-FX7E
2-887-515-14(1)
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB06MEN.fm
You can adjust the exposure between -7
(dark) and +7 (bright) using the SEL/PUSH
EXEC dial. and the setting value appear
when [AE SHIFT] is set to anything other
than the default setting.
b Note
If you adjust all of the iris, gain, shutter speed
manually, you cannot obtain the effect of [AE
SHIFT].
You can select the speed to adjust the
exposure automatically, in accordance with
the brightness of the subject. [FAST],
[MIDDLE], and [SLOW] are available (the
default setting is [FAST]).
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (18dB, the
default setting), [12dB], [6dB] or [0dB].
b Note
If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
You can select the highest iris value for the
automatic adjustment from [F11] (the
default settings), [F5.6], [F4].
b Note
If you adjust the iris manually, you cannot
obtain the effect of [AT IRIS LMT].
You can set the auto white balance
operation under a reddish light source such
as an incandescent lamp or candle, or under
a blueish light source such as in outdoor
shade.
BINTELLIGENT
Adjustment is automatically performed to
achieve a natural atmosphere according to
the brightness of the scene.
HIGH
Redness or blueness will decrease.
MIDDLE
LOW
Redness or blueness will increase.
b Notes
This is only effective when white balance is
adjusted automatically.
[AWB SENS] is not effective under a clear sky
or the sun.
BON
Select to record under normal conditions.
Flickering of the screen under a light
source such as fluorescent lamps will be
reduced.
OFF
Select when you do not want to reduce
flickering of the screen.
b Note
Flickering may not be reduced depending on the
light source.
You can change the zoom speed of handle
zoom switch positions H and L (p. 30).
x H
You can select the zoom speed of position
H of the handle zoom switch from 1 (slow)
through 8 (fast) (the default setting is 6).
x L
You can select the zoom speed of position
L of the handle zoom switch from 1 (slow)
through 8 (fast) (the default setting is 3).
AE SHIFT
AE RESPONSE
AGC LIMIT
AT IRIS LMT
AWB SENS
FLCKR REDUCE
HANDLE ZOOM
Press the MENU button t select the (CAMERA SET) by turning the SEL/PUSH EXEC
dial.