74
HDR-FX7E
2-887-515-14(1)
G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB07DUB.fm
Jacks on your camcorder
Open the jack cover and connect the cable.
Using an i.LINK cable (optional)
The dubbed format (HDV/DV) differs depending on the recording format or the format
supported by the VCR/DVD device. See the table below for selecting the appropriate settings,
and perform necessary menu setting.
b Note
• Disconnect the i.LINK cable before changing these menu settings, otherwise the VCR/DVD device may
not correctly identify the video signal.
z Tip
• This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the device to be
connected.
Copy format
Camcorder
recording
format
Format supported by the
VCR/DVD device
Menu setting
HDV
format*
1
DV format
[VCR HDV/DV]
(p. 66)
[i.LINK CONV]
(p. 67)
Copy HDV recording as
HDV
HDV HDV –*
3
[AUTO]
[OFF]
Convert HDV recording to
DV
HDV DV DV [ON]
Copy DV recording as DV DV DV DV [OFF]
When tape is recorded in both HDV and DV format
Convert both HDV and DV
format to DV
HDV/DV DV DV [AUTO] [ON]
Copy only portions
recorded in HDV format
HDV HDV –*
3
[HDV] [OFF]
DV –*
2
–*
3
Copy only portions
recorded in DV format
HDV –*
2
–*
2
[DV] [OFF]
DV DV DV
*
1
Recording device compliant with the HDV1080i specification.
*
2
The tape advances, but no video or sound is recorded (blank).
*
3
Picture is not recognized (no recording is made).
1
2
Dubbing to VCR, DVD/HDD device, etc. (Continued)