Filter
Top Products
65
Customizing Your Camcorder
You can set this function when you record
still images using the built-in flash.
When you set [REDEYE REDUC] to [ON],
then set [FLASH MODE] to [AUTO] or
[ON], appears. You can prevent redeye
by activating the pre-flash before the flash
flashes.
b Notes
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
Detects faces and adjusts the focus, color
and exposure automatically. Also,
optimizes the face image.
BON ( )
Detects a face and shows a frame on it. The
detected face image is optimized
automatically.
ON[NO FRAMES] ( )
Detects a face without showing a frame.
The detected face image is optimized
automatically.
OFF
Does not use [FACE DETECTION]
function.
b Notes
• Faces may not be detected depending on
recording conditions.
• [FACE DETECTION] may not function
properly depending on recording conditions. Set
[FACE DETECTION] to [OFF] in this case.
The default setting is [ON], allowing you to
search for faces automatically and to
display the [Face Index] screen (p. 34).
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing
when the face is recorded in the [Face
Index].
:This icon appears when faces cannot
be recorded in the [Face Index].*
* The number of faces that can be detected is
limited.
REDEYE REDUC
FACE DETECTION
Face detection frame
Face detection mark
INDEX SET