Filter
Top Products
71
Customizing Your Camcorder
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 60
(OPTION MENU) t page 72
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn on the (Movie)
lamp.
z Tips
• The demonstration will be suspended in
situations such as those described below.
– When you press START/STOP or PHOTO.
– When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
– When you turn on the (Still) lamp.
See page 96.
DEMO MODE
CALIBRATION
B5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
You can set the time that you want the
camcorder to remain on before turning off
in sleep mode (p. 29) from [OFF], [5 min]
(the default setting), [10 min] and [15 min].
b Notes
• [A.SHUT OFF] does not work during sleep
mode.
z Tips
• When you set to [OFF], you can save battery
power by not using the QUICK ON function.
The default setting is [ON], allowing you to
do the playback operation with the remote
commander of your TV by connecting your
camcorder to a “BRAVIA” Sync
compatible TV with the HDMI cable
(p. 42).
A.SHUT OFF (Auto shut
off)
QUICK ON STBY
(Quick on standby)
CTRL FOR HDMI
(Control for HDMI)