Sony 6027PW Camcorder User Manual


 
Introduction
Let’s Use Network Camera Recorder
7
The InstallShield Wizard Complete dialog
appears.
Click Finish to complete installation.
If the message requiring restarting appears, restart
the computer.
To uninstall Network Camera Recorder
To uninstall Network Camera Recorder, follow the
normal uninstall procedure for Windows.
Even if Network Camera Recorder has been uninstalled,
the setup and recorded data are not deleted. To delete
these data, delete the installation folder and the path
specified for the storage location manually.
Let’s Use Network
Camera Recorder
This section introduces the basic operations of Network
Camera Recorder step by step for a user using the
software for the first time after installation.
For detailed operations, read the “Operations” and
“Setups” chapters on pages 12 and after.
Operation procedures
1. Start the program.
To view the image of the camera…
2. Register the camera.
3. Assign a camera to the monitor window.
After the image of the camera is displayed…
4. Control the camera.
5. Record the camera image.
6. Play the recorded image.
Notes
Before using, connect the camera to the network and
turn ON the power.
For using Network Camera Recorder, you should log
in the computer as the Power User or Administrator.
1. Start the Program
Select All Programs from the Windows start menu,
then select Network Camera Recorder and Network
Camera Recorder in sequence.
You can start the program by double-clicking the
Network Camera Recorder icon on the desk top, if
provided.