Filter
Top Products
7
Chapter 7 Location and Function of Parts and Controls 135HDC-900/950/930 Series Product Information Manual
7-14. HDVF-20A, HD Electronic Viewfinder
7-14-1 Appearance
a Plug
Connect to the VF connector on the camera.
b Stopper
Prevents the viewfinder from coming off the camera
when it is slid from side to side.
c Tally indicator (rear)
Lights up when the camera receives a tally control
signal. This indicator can be covered when not in use.
d Diopter adjustment ring
Allows for optimal focus adjustment.
e Tally indicator (front)
Lights up when the camera receives a tally control
signal. Set the TALLY switch i to OFF when not in use.
The brightness can also be adjusted with the TALLY
switch i.
f PEAKING control
Turning this control clockwise adjusts the picture
sharpness, and makes focusing easier. This control
has no effect on the output signals of the camera.
g CONTRAST control
Adjusts the contrast of the screen. This control has no
effect on the output signals of the camera.
PEAKING CONTRAST BRIGHT
DISPLAY
ASPECT
TALLY
HIGH
LOW
OFF
ZEBRA
ON
MOMENT
OFF
1 Plug
2 Stopper
3 Tally indicator (rear)
4 Diopter
adjustment
ring
5 Tally indicator (front)
6 PEAKING control
7 CONTRAST control
8 BRIGHT control
9 TALLY switch
q; ZEBRA switch
qa DISPLAY/ASPECT switch
Viewfinder cable
Microphone holder
Eyecup