Sony 900 Camcorder User Manual


 
10
Chapter 10 Specifications 182HDC-900/950/930 Series Product Information Manual
10-4. HDCU-900, HD Camera Control Unit
General
Power supply 100/110-120/220-240 V
AC, 50/60 Hz
Current consumption 5.4 A (at 100 V AC, entire
system active)
Peak inrush current (1) Power ON, current
probe method:
80 A (240 V), 80 A (100
V)
(2) Hot switching inrush
current, measured in
accordance with European
standard EN55103-1:
10 A (230 V)
Operating temperature 5°C to 40°C (41°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to
+140°F)
Mass Approx. 20 kg (44 lb 1 oz)
Dimensions See below
(Unit: mm/inches)
Input/Output connectors
CAMERA Optical fiber connector (1)
1.485 Gbps/1.4835 Gbps SDI’ 2,
240 V AC power supply
INCOM/TALLY/PGM D-sub 25-pin (1)
INCOM-4W, 2 systems (PD /ENG), 0 dB
PGM, 2 systems, 0 / –20 dB
TALLY (R, G)
RCP/CNU REMOTE 8-pin multi-connector (1)
TRUNK LINE D-sub 9-pin, female (1)
RS-232C, for CHU
transmission or system
expansion
I/O PORT D-sub 15-pin, female (1)
(JAE-made DA-C1-J10
recommended)
Input connectors
AC IN 100, 110 to 120, 220 to 240
V AC switchable
HD SERIAL RET INPUT BNC type (4), SMPTE-
292M,
Bit rate: 1.485 Gbps/
1.4835 Gbps
SD SERIAL RET INPUT BNC type (4), SMPTE-
259M
Bit rate: 270 Mbps
REFERENCE INPUT BNC type (2), loop-through
output
HD: SMPTE-274M, tri-level
sync, 0.6 Vp-p, 75 ohms
SD: Black burst (or 10F-
BB), 0.286 Vp-p, 75 ohms
(NTSC)
0.3 Vp-p, 75 ohms (PAL)
PROMPTER IN BNC type (2), loop-through
output, analog signal, 1.0
Vp-p, 75 ohms
MIC REMOTE D-sub 15-pin (1) (JAE-
made DAC1-J10
recommended)
Output connectors
MIC OUT XLR 3-pin, male (2), 0 dBs/
–20 dBs
DIGITAL AUDIO OUT BNC type (1), AES/EBU
format
CHARACTER OUT BNC type (1), 525/625
black and white
WF REMOTE D-sub 15-pin, female (1)
(JAEmade DA-C1-J10
recommended)
HD SERIAL OUTPUT BNC type (3)
SMPTE-292M, 0.8 Vp-p, 75
ohms,
Bit rate: 1.485 Gbps/
1.4835 Gbps
HD SERIAL MONI OUTPUT
BNC type (1), SMPTE-
292M,
0.8 Vp-p, 75 ohms
Bit rate: 1.485 Gbps/
1.4835 Gbps
SD SERIAL OUTPUT BNC type (4), SMPTE-
259M,
0.8 Vp-p, 75 ohms
Bit rate: 270 Mbps
SYNC OUT BNC type (1)
HD: BTA S001A, tri-level
sync, 0.6 Vp-p, 75 ohms
SD: composite sync, 0.3
Vp-p, 75 ohms
HD SYNC or SD SYNC
selectable
PIX OUT BNC type (1), VBS/R/G/B
(VBS 1 Vp-p, 75 ohms)
WF OUT BNC type (1), VBS/R/G/B
(VBS 1 Vp-p, 75 ohms)
WF MODE 4-pin (1)
Supplied accessories
AC power cord (1)
Power cord plug holder (1)
2-pin/3-pin transformer AC plug (1)
4-pin connector (1)
Number plates (1 set)
Fuses (1 set)
Operation manual (1)
Maintenance manual Part 1 (1)
Optional accessories
HKCU-901 SD Analog Interface Unit
HKCU-902 HD Analog Interface Unit
HKCU-903 Frame Rate Converter Unit
HKCU-904 Line Converter Unit
CCA-5-3 Connection Cable (3 meter/10 feet)
CCA-5-10 Connection Cable (10 meter/33 feet)
Maintenance manual Part 2