Filter
Top Products
10
Chapter 10 Specifications 183HDC-900/950/930 Series Product Information Manual
10-5.HDCU-950, HD Camera Control Unit
General
Power supply 100 to 240 V AC, 50/60 Hz
Current consumption 3.6 A max.
Standby power Approx. 5 W
Peak inrush current (1) Power ON, current
probe method:
30A (240V), 8A (100V)
(2) Hot switching inrush
current, measured in
accordance with European
standard EN55103-1:
26A (230V)
Operating temperature –10°C to +40°C (+14°F to
+104°F)
Storage temperature –20°C to +50°C (–4°F to
+122°F)
Mass Approx. 6.5 kg (14 lb 5 oz)
Dimensions See below
(Unit: mm/inches)
Input/output connectors
CAMERA Optical fiber connector (1)
1.485 Gbps/1.4835 Gbps SDI × 2,
180 V DC power supply
INCOM/TALLY/PGM D-sub 25-pin (1)
• INCOM-4W, 2 systems
(PD /ENG), 0 dB
• PGM, 2 systems, 0 dB/
–20 dB
• TALLY (R, G)
RCP/CNU 8-pin multi-connector (1)
Input connectors
AC IN 100 to 240 V AC
RET 1/2/3 BNC type (3),
VBS: 1.0 Vp-p, 75 ohms
HD-SDI: SMPTE-292M,
1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE-259M, 270
Mbps
REFERENCE BNC type (2), loop-through
output
HD: SMPTE-274M, tri-level
sync, 0.6 Vp-p, 75 ohms
SD: Black burst
(NTSC: 0.286 Vp-p, 75
ohms)
(PAL: 0.3 Vp-p, 75
ohms)
or NTSC 10F-BB
PROMPTER BNC type (2), loop-through
output, analog signal, 1.0
Vp-p, 75 ohms
MIC REMOTE D-sub 15-pin (1) (JAE-
made DAC1-J10
recommended)
(switchable to WF
REMOTE by an internal
setting)
Output connectors
MIC XLR 3-pin, male (2),0 dBu/
–20 dBu
HD SDI OUT BNC type (2), SMPTE-
292M, 0.8 Vp-p, 75 ohms,
1.485 Gbps/1.4835 Gbps
SD SDI OUT BNC type (2), SMPTE-
259M, 0.8 Vp-p, 75 ohms,
270 Mbps
MONI (HD SDI) BNC type (1), 0.8 Vp-p, 75
ohms, 1.485 Gbps/1.4835
Gbps
133 (5 1/4)
481 (19)
465 (18 3/8)
424 (16 3/4)
52.7
(2 3/8)
460 (18 1/8)
Dimensions Unit: mm (inches)