Filter
Top Products
8
Chapter 8 Connectors and Cables 160HDC-900/950/930 Series Product Information Manual
B-Y/B OUT
R-Y/R OUT
VBS OUT
Connector Connector/cable
HKCU-953
FRAME REFERENCE IN
FRAME REFERENCE OUT
HDCU-950 1-569-370-12 PLUG, BNC or
RET IN (1-3) BELDEN8281 Cable or
SERIAL OUTPUT (1-2,
MONI) equivalent
SD SDI OUT (1-3)
HKCU-953
HD SDI OUT (1-2)
MIC1/MIC2(3-pin, Male)1-508-083-00 XLR 3-pin
female or CANNON XLR-3-
11C equivalent
MIC REMOTE (WF
REMTOE) (D-sub
15-pin, Female) 1-506-582-11 D-sub 15-pin,
male or JAE DA-CI-J10
equivalent
INTERCOM/TALLY/
PGM (D-sub 25-pin,
Female) D-sub 25-pin, male
JAE DA-25PF-N equivalent
WF MODE (4-pin,
Female) 1-560-155-00 PLUG, 4-pin
male (supplied)
RCP/CNU (8-pin,
Female) 1-766-848-11 PLUG, 8-pin
male or CCA cable assembly
(optional)
CCA-5-30 (30 m), CCA-5-10
(10 m), CCA-5-3 (3 m)
INTERCOM (5-pin,
Female) 1-508-370-11 XLR 5-pin, male
or CANNON XLR-5-12C
equivalent
8-4. CNU-700, Camera Command Network Unit
8-4-1 Connector Input/Output Signals
Main connector input and output signals are as
follows.
8-4-1-1 BNC connector 75 Ohms
[Input Signal]
REFERENCE 300 mV p-p, loop through
[Output Signal]
CHARACTER 700 mV p-p,
300 mV p-p (SYNC)
8-4-1-2 RS232C-1/2/3
*1
(9P, Female)
RS232C
RS422
*2
*1 The RS-232C-3 port can be used only when the BKP-7930
is installed.
*2 The RS-232C-2 and RS-232C-3 ports can be used for RS-
422 interfaceing by changing the switch setting of S802 to
S806 on the IF-777 board.
8-4-1-3 REMOTE (8P, Female)
*3
CCU1 to CCU6 CONNECTOR
6PIN . . POWER (+) IN
7PIN . . POWER (–) IN
RCP1 to RCP6, AUX1, AUX2, MSU
6PIN . . POWER (+) OUT (RCP POWER +25 V)
7PIN . . POWER (-–) OUT (GND for Power)
VCS CONNECTOR
6PIN . . NOT USED
7PIN . . NOT USED
No. Signal Specifications
1 DCD IN DATA CARRIER DETECT
2 RXD IN RECEIVED DATA
3 TXD OUT TRANSMITTED DATA
4 DTR OUT DATA TERMINAL READY
5 SIGNAL GND SIGNAL GND
6 DSR IN DATA SET READY
7 RTS OUT REQUEST TO SEND
8 CTS IN CLEAR TO SEND
9NC —
No. Signal Specifications
1 DCD IN DATA CARRIER DETECT
2 RXD IN RECEIVED DATA
3 TXD (+) OUT TRANSMITTED DATA
4 TXD (-) OUT TRANSMITTED DATA
5 SIGNAL GND SIGNAL GND
6 RXD (-) IN RECEIVED DATA
7 RTS OUT REQUEST TO SEND
8 CTS IN CLEAR TO SEND
5
9
6
1
(External view)
9NC —
No. Signal Specifications
1 TX (+) CNU SERIAL DATA
2TX (–)
3 RX (+) MSU/RCP/CCU/VCS/AUX
SERIAL DATA
4RX (–)
5 TX GND GND for TX
6 POWER (+)
*3
7 POWER (–)
*3
8SPARE
CHASSIS GND CHASSIS GND
No. Signal Specifications
1
2
3
4
5
6
7
8
(External view)
RCP/CCU/MSU/VCS
AUX 1/2/3/4