Filter
Top Products
2
Chapter 2 Total System 21HDC-900/950/930 Series Product Information Manual
HKCU-901 SD Analog Interface Unit
HKCU-902 HD Analog Interface Unit
HKCU-903 Frame Rate Converter
Unit
HKCU-904 Line Converter Unit
CCA-5-3 Connection Cable (3
meter/10 feet)
CCA-5-10 Connection Cable (10
meter/33 feet)
EX-450(A-8314-633-A) Expansion Board
For HDCU-950
AC power cord: USA and Canada: 1-
551-812-XX
Other countries: 1-782-
929-XX
Power cord plug holder:USA and Canada: 2-
990-242-01
Other countries: 3-613-
640-01
HKCU-951 SD Encoder Unit
HKCU-953 HD Frame Rate
Converter Unit
CCA-5-3 Connection Cable (3
meter/10 feet)
CCA-5-10 Connection Cable (10
meter/33 feet)
RMM-301 Rack Mount Adaptor
EX-854(A-8344-228-A) Extension Board
EX-893(A-8344-696-A) Extension Board
For CNU/ MSU/RCP
BKP-7900 Extender Board for
CNU-700/500
BKP-7930 Expansion Board for
system expansion up to
12 cameras for the CNU-
700
BKP-7932 BVP-370 Series
Interface Board for the
CNU-700
BKP-7933 S-Bus Interface Board
for CNU-700
CCA-5 Cables 8p-8p cables for the
CNU-700/500, MSU-
700A/750, VCS-700 and
RCP-700 Series
CCA-5-3 3 m
CCA-5-10 10 m
CCA-5-30 30 m
2-7. System Setup
2-7-1 Setting the System Format using
HDCU-900
The HDCU-900 can support input and output of
multiple formats. It can also support various types of
user’s format by installing the optional circuit boards.
The slots to which the circuit boards are inserted and
the internal switches of the unit differ depending upon
the system used. They need to be set according to the
system used.
*1 for the USA and Canada.
*2 for the countries other than the USA and Canada.
Note
• Be sure to install the HKCU-901 of the same -regional
location as the HDCU-900.
• When the HKCU-901 is going to be installed, confirm
beforehand that the RC-86 board is installed in the
second slot from the top on the front side, the DIF-
102 board or the HKCU-902 is installed in the second
slot from the top on the front side.
• When installing the optional boards, be sure to start
installation from the second slot from the top on both
the front side and rear side. Never install an optional
board in the third slot from the top leaving the slots
blank without installing the board.
• Be sure to install the HKCU-901/903/904 into the
same slot on the front and rear sides.
• Do not install two or more of the same circuit boards
at the same time.
HDCU-900 and list of optional boards
Model name
Board name
(Slots on the front)
Board name
(Slots on the rear)
Slot to be installed
HDCU-900
DPR-163 SDI-54A Fixed to the top most slot
RC-86 DIF-102 Second or third slot from the top
AT-141 – Fixed to the bottom most slot
SD Analog Interface Unit
HKCU-901
IF-789A
*1
/789P
*2
VDA-57 Third slot from the top
HD Analog Interface Unit
HKCU-902
– ADA-59 Second or third slot from the top
Frame Rate Converter
Unit HKCU-903
FC-83 SDI-54B Second slot from the top
Line Converter Unit
HKCU-904
LC-41 SDI-54C Second or third slot from the top