Sony CH240 Security Camera User Manual


 
Administrating the Camera
Configuring the Viewer — Viewer Menu
100
Registering in Cameras
Specify a number on the camera list and set the IP
address, port number, and comment for each camera.
Insert: Click to register a camera in the camera list.
Modify: Click to edit a selected camera list.
Delete: Click to delete a selected camera list.
Down: Click to decrement the number indicating
registered camera numbers.
Up: Click to increment the number indicating registered
camera numbers.
Text
Note
The camera list can be set only when Plug-in free viewer
is selected as the homepage.
Text1 text, Text2 text and Text3 text
Enter the text to be displayed on the viewer screen.
Text1 link, Text2 link and Text3 link
Specify the URL of the link to assign a link to the text.
Text color, Background color 1, and
Background color 2
Specify the font color of the text and background colors.
The colors are specified in the same way as specifying
those for the header.
Show comment if camera selected
Select this option to display comments on the viewer
screen.
Monitor
Configure the setting for the camera image display part
of Plug-in free viewer.
Note
The camera list can be set only when Plug-in free viewer
is selected as the homepage.
Initial streaming
Set the display method for camera image for streaming.
Initial image size
Set the initial camera image size.
Initial image codec
Set the initial codec mode.
Image1: Display the image set in Image 1 of camera
menu-video codec tab when streaming starts.
Image2: Display the image set in Image 2 of camera
menu-video codec tab when streaming starts.
Image3: Display the image set in Image 3 of camera
menu-video codec tab when streaming starts.
Note
When selecting the image with video codec off, it will
switch to image1.
Initial PTZ
Set the pan/tilt/zoom operation modes for streaming.
No PTZ: PTZ is not available when streaming starts.
Area zoom: Area zoom is available when streaming
starts.
PTZ control bar: Display the PTZ operation bar when
streaming starts.
Vector dragging: Vector drag is available when
streaming starts.
Tip
This device is not equipped with operational functions
for PTZ.
Initial frame rate
Set the initial camera image frame rate.
Initial image
Set what to initially display on the camera image display
area.
Still image: JPEG still images are acquired from the
camera and displayed at start-up.
Specified image (URL): Specify a still image of your
choice by URL at start-up.
Auto play: Run to start playback.
Blank: No display at start-up.
Click to start streaming: By ticking this when Still
image or Specified image is selected, you can start
play by clicking on the image.
Tip
If the menu display is Off, Blank cannot be selected.
Initial sound
Set the initial volume for when streaming starts. Check
Muting for muting sound.
Note
This setting is valid only when SNC ActiveX viewer is
selected for Streaming method from Setting of the
Plug-in free viewer control bar.