Filter
Top Products
Administrating the Camera
Downloading Images from the Camera — FTP server Menu / Downloading Images from the Camera — FTP server Menu
83
About the extension of a file
A file to be recorded/sent using the image memory
function Edge Storage function or the Mail (SMTP)/
FTP client function has one of the following four
extensions depending on the video mode setting and the
recording/sending settings of the camera.
.m4f: MPEG4 image files (including sound)
.jpf: JPEG image files (including sound)
.jpg: JPEG still image files
.maf: H.264 image files (including sound)
The SNC video player (page 119) allows playback of
“.m4f”, “.maf” and “.jpf” files.
Downloading Images
from the Camera
— FTP
server Menu
When you click in the Administrator menu,
the FTP server menu appears. This menu allows you to
search image and audio files stored in the built-in
memory (approximately 8 MB) or CF memory card (not
supplied. Applicable for SNC-CH240/CH140/CH180/
CH280 only) inserted in the camera, or configure the
FTP server function for downloading, using the FTP
client software on the computer.
FTP server function
To activate the FTP server function, select On.
x SNC-CH240/CH140/CH180/CH280
Selected root directory
Select the memory that contains the file you want to
download. The current memory space is displayed on
the right.
Built-in memory: Built-in memory of this camera
CF memory card: CF memory card inserted into the
CF card slot of the camera
x SNC-DH240/DH140/DH180/DH280
Built-in memory
The current memory space of the built-in memory is
displayed.
Notes
• The frame rate and operability on the main viewer
may be reduced when you logged in to the FTP server
of this unit using the FTP client software installed in
the computer.
• Not available for SNC-CH180/CH280 when it is
powered by PoE.
OK/Cancel
See “Buttons common to every menu” on page 32.
FTP server