Filter
Top Products
21
Getting Started
To remove the battery pack
1 Turn the POWER switch to OFF
(CHG).
2 Slide the BATT (battery) release lever
(1) and remove the battery pack (2).
b Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/
(Still) lamp (p. 23)/ACCESS lamp (p. 28)/
access lamp (p. 30) are turned off.
• When you store the battery pack, fully discharge
the battery before storing it for an extended
period (p. 117).
To use a power source from a wall
outlet (wall socket)
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
When recording on the internal
memory (DCR-DVD450E/DVD850E)
or “Memory Stick PRO Duo” media
When recording on a disc
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
• See page 26 for selecting the media.
• All times measured with recording mode [SP]
under the following conditions:
Top: When recording with the LCD panel.
Bottom: When recording with the viewfinder
while the LCD panel is closed.
Battery pack Charging time
NP-FH30
(supplied)
115
NP-FH50 135
NP-FH70 170
NP-FH100 390
BATT (battery)
release lever
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH30
(supplied)
95 45
105 50
NP-FH50 155 75
170 85
NP-FH70 330 165
370 185
NP-FH100 745 370
830 415
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH30
(supplied)
80 40
90 45
NP-FH50 135 65
145 70
NP-FH70 290 145
315 155
NP-FH100 650 325
710 355
Continued ,