Filter
Top Products
85
Customizing Your Camcorder
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 77
The default settings are marked with B.
If you connect the camcorder to a wall
outlet (wall socket), you can view the
demonstration in about 10 minutes after
you turn the POWER switch to
(Movie). The default setting is [ON].
z Tips
• The demonstration will be suspended in the
following situations.
– When you press START/STOP.
– When you press DUBBING (DCR-
DVD450E/DVD850E)
– When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
– When you slide the disc cover OPEN switch.
– When you move the POWER switch to still
image recording.
– When you press (HOME)/ (VIEW
IMAGES).
See page 120.
DEMO MODE
CALIBRATION
B5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
You can display the recording date and time
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instruction manual of the
playback device.
A.SHUT OFF (Auto shut
off)
SUB-T DATE