Filter
Top Products
80
120×
Up to 60 × zoom is performed optically, and
after that, up to 120 × zoom is performed
digitally.
2000×
Up to 60 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
You can compensate for camera shake. Set
[ STEADYSHOT] to [OFF] ( ) when
using a tripod (sold separately), then the
image becomes natural. The default setting
is [ON].
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second. The default setting is [ON].
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP to
make the frame disappear. The default
setting is [OFF].
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
BON
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
–When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to (Movie).
–When you press DISP to switch the
indicator from off to on when the
POWER switch is set to (Movie).
– When you select the movie recording
mode on the HOME MENU.
b Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
S
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing when
the face is recorded in Face Index.
: This icon appears when faces cannot
be recorded in Face Index.
To play back scenes using Face Index, see
page 42.
b Notes
• The number of faces detected in a movie is
limited.
STEADYSHOT
AUTO SLW SHUTTR
(Auto slow shutter)
GUIDEFRAME
REMAINING SET
FACE SET
MOVIE SETTINGS (Continued)