Filter
Top Products
62
Dubbing movies to VCR or DVD/HDD recorders
You can dub movies played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 20). Refer also to the instruction manuals supplied with the devices to be
connected.
b Notes
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
Connect to the input jack of the other
device.
B A/V connecting cable with S
VIDEO (sold separately)
When connecting to the other device via
the S VIDEO jack, by using an A/V
connecting cable with S VIDEO (sold
separately), higher quality movies can
be produced than with an A/V
connecting cable. Connect the white and
red plugs (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with S VIDEO
(sold separately). The yellow plug
connection is not necessary. Connecting
only the S VIDEO plug will not output
audio.
Connecting a device with the A/V connecting cable
A/V Remote
Connector
S VIDEO
VIDEO
AUDIO
(Yellow)
(White)
(Red)
IN
VIDEO
AUDIO
(White)
(Red)
IN
Device without
S VIDEO jack
Device with
S VIDEO jack
VCRs or DVD/HDD recorders
: Video/Signal flow