Chapter 4 Adjustments and Settings for Recording 4-75
4
MASTER GAIN page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired position (LOW, MID, HIGH or
TURBO) (or use the rotary encoder).
4 Press the rotary encoder, to display a question mark to the left of the
display.
5 Turn the rotary encoder to display the gain value you wish to select.
Any of −3, 0, 3, 6, 9, 12, 18, 24, 30, 36,or 42 dB can be set for each
of the L, M, and H positions, in any sequence.
For TURBO, any of –3, 0, 3, 6, ..., 30, 36 , 42 dB
1)
can be selected.
Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST
to reset the gains to the factory set values (L = 0 dB, M = 9 dB, H =
18 dB, and TURBO = 36 dB).
To change the gain corresponding to another switch position, return
to step 3.
....................................................................................................................................
1) Video gain boosted from 30 dB to 36 or 42 dB by combining blocks of 2 or 4
adjacent pixels of the CCD.
(Continued)
Gain corresponding to
L position of GAIN selector
Gain corresponding to
M position of GAIN selector
Gain corresponding to TURBO
GAIN button selection
Gain corresponding to
H position of GAIN selector
m
∗∗∗
MASTER GAIN
∗∗∗
HIGH
LOW
MID
TURBO
:
:
0dB
: 18dB
9dB
: 36dB