Chapter 5 Setting Up the Camcorder 5-31
5
3 Connect the tuner power cord to the DC OUT connector of the
camcorder, and the audio output cable to the AUDIO IN connector
for channel 1 or 2.
Fitting a WRR-28M (using an NP-1B or BP-90A Battery
Pack)
Before attempting the following attachment, make sure that an NP-1B
Battery Pack is contained in the DC-L1 Battery Adaptor or that a BP-
90A Battery Pack is contained in the DC-L90 Battery Adaptor.
DC OUT
Set the AUDIO IN switch for
the appropriate channel to
REAR.
AUDIO IN for CH-1 or CH-2
Set the LINE/MIC/+48 V ON
selector for the appropriate
channel to MIC.
L
O
C
K
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•