2-4 Chapter 2 Locations and Functions of Parts and Controls
2
3 LIGHT connector
Connect the cable of a video light attached to the light shoe. The
maximum power consumption allowable for the video light is 30 W.
4 Lens mount
This is a special bayonet type lens mount.
5 Lens locking lever
After inserting the lens in the lens mount, rotate the lens mount ring with
this lever to lock the lens in position.
6 Lens mount cap
Remove this cap by pushing up on the lens locking lever. For protection
from dust, always insert this cap when no lens is mounted.
7 Tripod mount
Fit the supplied tripod adaptor to mount the camcorder on a tripod.
8 LENS connector (12-pin)
Fit the lens cable to this connector. Contact your Sony representative for
more information about the lens you are using.
9 Shoulder pad
You can move the shoulder pad forwards or backwards by loosening the
two screws. Do this to ensure the best balance when shooting with the
camcorder on your shoulder.