Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-81
4
FUNCTION 1/2 page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired output (or use the rotary
encoder).
Note that the test output signal reverts to ENC (encoded) every time
the camcorder is switched on.
4 Press the rotary encoder to display a question mark to the left of the
display.
5 Turn the rotary encoder to select the desired output.
The R−G and B−G signal outputs can be selected only when R−G/
B−G SEL on the OPERATION MODE page is set to ON.
Refer to the Maintenance Manual for information about the OPERATION
MODE page.
6 Press the rotary encoder, so that the question mark disappears.
(Continued)
Composite video
signal output
m
∗∗∗
FUNCTION 1/2
∗∗∗
TEST OUT
DETAIL
APERTURE
: ENC
SKIN TONE DTL
MATRIX
GAMMA
CHROMA
TEST SAW
CROSS COLOR FLT
: ON
: ON
: OFF
: OFF
: ON
: ON
: OFF
: OFF
a)
a) DNW-7/90/90WS only