Filter
Top Products
4-108 Chapter 4 Adjustments and Settings for Recording
4
Error message
CARD NOT
INSERTED!
WRITE
PROTECTED!
WRITE ERROR!
(flashing)
Reason
No setup card is
inserted.
WRITE PROTECT
is set to ON.
Circuit or card fault
Action
Close the menu and insert or
reinsert the card.
Set WRITE PROTECT to OFF.
Check the circuitry, or replace the
card with a verified card.
2 • To enable the write-protection function (the “ON” setting), turn
the rotary encoder counterclockwise as seen from the front of the
camera.
• To disable the write-protection function (the “OFF” setting), turn
the rotary encoder clockwise.
If data cannot be written
If when you press the rotary encoder in step 6 of the foregoing procedure
(page 4-105) one of the following error messages appears, then the data
was not written.
Data write error messages
Reading saved data from a card
Follow the procedure below.
Reading saved data from a card
2,3,4,6
1,2,7
3,5