Sony DNW-90WS Camcorder User Manual


 
6-6 Chapter 6 Maintenance
6
3 Set the F-RUN/SET/R-RUN switch to R-RUN.
4 Set the DISPLAY switch to CTL.
5 Press the VTR START button and check the following points.
The tape reels are turning.
The counter indication is changing.
The REC indicator in the viewfinder is on.
The RF and SERVO indicators on the display panel are off.
6 Press the VTR START button again, and check that the tape stops
and that the REC indicator in the viewfinder goes off.
7 Repeat the checks of steps 5 and 6, this time using the VTR button
on the lens.
8 Press the RESET button, and check that the counter display goes to
“00 : 00 : 00 : 00”.
9 Turn on the LCD LIGHT switch, and check that the display panel is
illuminated.
10Hold down the REW button to rewind the tape for a while, then
press the PLAY button. Check that the rewind and playback
functions operate normally.
11Press the STOP button and press the F FWD button. Check that the
fast forward function operates normally.
2 Testing the automatic audio level adjusting
functions
1 Set the AUDIO SELECT CH-1/CH-2 switches to AUTO.