Filter
Top Products
20
Basic Functions
Exposure
Mode
Power Off
1)
Power On
IFC
2)
Initializing
3)
Exposure mode
Wide-D ON
During displaying
the menu
Memory Recall
Command Full Auto Bright Shutter Pri Iris Pri Manual
CAM_AE
Full Auto/Manual/Shutter Pri/
Iris Pri/Spot Light
No No No Yes Yes
4)
Yes Yes Yes Yes Yes
5)
No
CAM_AE Bright
No No No Yes Yes Yes No No Yes Yes
5)
No
CAM_Slow Shutter Limit ON/OFF
No No No Yes Yes Yes Yes Yes No
7)
Yes
5)
No
CAM_Shutter Reset/Up/Down/Direct
No No No No No Yes No Yes Yes Yes
5)
No
CAM_Iris Reset/Up/Down/Direct
No No No No No No Yes Yes Yes Yes
5)
No
CAM_Gain Reset/Up/Down/Direct
No No No No No No No Yes Yes Yes
5)
No
CAM_Bright/Up/Down/Direct No No No No Yes No No No Yes Yes
5)
No
CAM_ExComp On/Off
No No No Yes Yes Yes Yes Yes No
7)
Yes
5)
No
CAM_ExComp Reset/Up/Down/Direct
6)
No No No Yes Yes Yes Yes Yes No
7)
Yes
5)
No
CAM_Backlight On/Off
No No No Yes No No No No No
7)
Yes
5)
No
CAM_WD On/Off
No No No Yes Yes Yes Yes Yes Yes Yes
5)
No
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is
output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.
4) Yes: Only when the camera changes to BRIGHT mode from Full Auto or SHUTTER Pri mode.
5) When the menu display is updating, operation is not possible.
6) No: This is not allowed when EX-COMP is set to OFF.
7) The settings are available; however, command actions will be executed only after Wide-D is set to OFF.