Filter
Top Products
51
System
Video signal EVI-H100V:
1920 × 1080p/29.97,
1920 × 1080p/25,
1920 ×1080i/59.94 (29.97PsF),
1920 ×1080i/50 (25PsF),
1280 × 720p/59.94,
1280 × 720p/50,
1280 × 720p/29.97,
1280 × 720p/25,
VISCA CONTROL (switched
with the SYSTEM SELECT
switch)
EVI-H100S:
1920 × 1080p/29.97,
1920 × 1080p/25,
1920 × 1080i/59.94 (29.97PsF),
1920 × 1080i/50 (25PsF),
1280 × 720p/59.94,
1280 × 720p/50,
1280 × 720p/29.97,
1280 × 720p/25,
NTSC(Letter Box), PAL(Letter
Box), VISCA CONTROL
(switched with the SYSTEM
SELECT switch)
Synchronization Internal synchronization
Image device 1/2.8 type Exmor CMOS
Lens 20× (optical), 12× (digital)
f = 4.7 – 94.0 mm, F1.6 – F3.5
Horizontal angle: 2.9 (TELE end) to 55.4 degrees
(WIDE end) (1080 line mode)
2.0 (TELE end) to 37.6 degrees
(WIDE end) (720 line mode)
Minimum object distance
10 mm (0.4 inches) (WIDE end) to
800 mm (31.5 inches) (TELE
end) 290 mm (11 27/64 inches)
(Default)
Minimum illumination
Less or equal to1.7 lux (50%, high-
sensitivity mode off)
Less or equal to 0.5 lux (50%, high-
sensitivity mode on)
Shutter speed 1 to 1/10,000 sec. (22 steps)
Video S/N 50 dB
Pan/tilt action Horizontal: ±170 degrees
Maximum panning speed:
100 degrees/sec.
Vertical: +90, –20 degrees
Maximum tilting speed:
90 degrees/sec.
Input/output connectors
Video output EVI-H100V:
COMPONENT (VIDEO OUT):
DVI-I connector
Y: 1 Vp-p (sync, at 75-ohm
termination)
Pb/Pr: ±350 mVp-p (75-ohm
termination)
3 values Sync : ±300mV p-p
(75-ohm termination)
HD/VD Sync: 3.3 Vp-p
DVI Digital VIDEO (VIDEO
OUT): DVI-I connector
EVI-H100S:
COMPOSITE (VBS VIDEO
OUT):
1 Vp-p (sync, at 75-ohm
termination)
HD-SDI (HD OUT) : BNC type
800mVp-p, 75-ohm
SMPTE292M compliant with
serial interface
Control input/output
VISCA IN: Mini DIN 8-pin type,
RS-232C
VISCA OUT: Mini DIN 8-pin type,
RS-232C
VISCA RS-422: 9-pin
Power connector JEITA type4 (DC 12 V)
General
Input voltage 12 V DC (10.8 to 13.0 V DC)
Current consumption
EVI-H100S : 1.0 A max. (at 12 V DC)
EVI-H100V : 0.92 A max. (at 12 V
DC)
Specifications