Filter
Top Products
21
Basic Functions
Effect
Mode
Power Off
1)
Power On
Command
IFC
2)
Initializing
3)
During displaying
the menu
Memory Recall
CAM_Aperture Reset/Up/Down/Direct
No No No Yes
4)
No
Display info. (ON/OFF)
No No No Yes
4)
No
CAM_PictureEffect
OFF/Neg.Art/B&W
No No No Yes
4)
No
CAM_ICR ON/OFF
No No No Yes
4)
No
CAM_AutoICR ON/OFF/Threshold
No No No Yes
4)
No
CAM_HR ON/OFF No No No Yes
4)
No
CAM_NR No No No Yes
4)
No
CAM-ChromaSuppress No No No Yes
4)
No
CAM_ColorGain No No No Yes
4)
No
CAM_ColorHue No No No Yes
4)
No
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home
position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.
4) When the menu display is updating, operation is not possible.