Filter
Top Products
SHORT
The remaining capacity of the memory card is insufficient for loop recording.
FULL
Remaining capacity of the memory card is insufficient for recording.
MAX
The maximum number of files that can be recorded has been reached.
MEDIA
The memory card is not inserted properly.
The memory card is damaged.
The memory card does not support XAVC S movie recording.
NoCRD
There is no memory card inserted.
NoDSP
The camera is not connected to a TV when playback is started.
PLANE
When the airplane mode is set to [ON], GPS and Wi-Fi cannot be used.
NoSET
Set the necessary settings for USTREAM using “Camera Settings for Live Streaming” of the Action
Cam Movie Creator’s camera settings.
Auth
Log in to USTREAM again and confirm the settings using “Camera Settings for Live Streaming” of the
Action Cam Movie Creator’s camera settings.
CHANL
The channel set by “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera
settings is incorrect.
This message also displays if other media starts streaming on the same channel while streaming from
your camera is performed.
Set the channel again.
DATE
Set the date and time again on your camera.
APErr
Access point has been found but is not connected. Check the password of the access point and
connect again.
PREP
The network is temporarily unavailable.
Netwk
The saving settings of video cannot be saved to USTREAM because an error has occurred on the