Filter
Top Products
You can also update the GPS assist data by inserting a memory card into the computer. Display the camera
setting’s screen of Action Cam Movie Creator, select “Update GPS Assist Data” - the desired memory card
drive to be installed on your computer, and then update the GPS assist data. If you insert this memory card into
the camera, the GPS assist data will be reflected on the camera.
Note
GPS log is recorded only when recording movies. When you shoot still images, only the location
information is recorded.
If you do not record the location information, set the GPS log to [OFF].
During takeoff and landing of an airplane, set the airplane mode to [ON].
Use GPS in accordance with the regulations of the place or situation.
It may take from several tens of seconds to several minutes to record the location information when
you use the GPS for the first time or use it again after long intervals. Triangulating time can be
shortened by taking in GPS assist data.
Do not cover the GPS sensor with your finger when searching for GPS satellites or when
triangulating. This decreases the sensitivity of the GPS sensor and triangulation may fail.
Sony does not collect location information and routing information.
To display location information and routing information as a map on a computer, Sony provides data
of location information and routing information to Google Inc.
Although the camera does not have the function to delete log files, you can delete them by formatting
the media.
The maximum number of log files that can be recorded is 256/day. When the maximum number of
recorded log files is reached, you can continue to shoot images, but cannot record log files.
[44] How to use Changing the Settings Camera settings
Airplane mode
When you are in an airplane or another restricted place, you can set the camera to temporarily disable
all functions related to the wireless applications such as Wi-Fi/GPS, etc. If you set the airplane mode to
[ON], an airplane mark will be displayed on the display panel.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [PLANE], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
ON: Select this when you are on board an airplane (The Wi-Fi/GPS function is disabled).
OFF: Select this for normal use (The Wi-Fi/GPS function is enabled).