Filter
Top Products
2160 24p 60 M (only when [V.SYS] is set to [NTSC])
Recorded image: XAVC S 60 Mbps
*4
Resolution: 3840×2160
Imaging frame rate: 24p
Playback frame rate: 24p
BACK: Returns to the [VMODE] menu.
*1
Frame rate depends on the NTSC/PAL setting.
*2
Action Cam Movie Creator™ converts the frame rate to 60p/50p and plays back images at standard speed. It also allows you to
play back images in slow motion and edit them during slow motion playback.
*3
Depending on your device and software, images are played back at 60p/50p.
*4
Steadyshot is disabled and the field angle changes.
Note
Continuous movie shooting time is approximately 13 hours.
When you play images recorded in high speed, the frame rate will be 60p/50p, and playback will be
standard speed.
[27] How to use Changing the Settings Shooting settings
SteadyShot
You can activate the camera-shake reduction when shooting.
1. Press the NEXT button or PREV button to select [SETUP] - [STEDY], then press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
ON: Uses SteadyShot (Field angle: 120°).
OFF: Does not use SteadyShot (Field angle: 170°).
BACK: Returns to the [STEDY] menu.