Filter
Top Products
Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button
again.
FORMT: Selects the time code recording method.
DF: Records the time code in drop frame.
NDF: Records the time code in non-drop frame.
In the following situations, the time code is fixed to [NDF].
When [VMODE] is set to 24p
When [V.SYS] is set to [PAL]
RUN: Sets how the time code advances.
REC: The time code advances only while recording XAVC S movies. It is recorded sequentially from
the time code on the image recorded last time.
FREE: The time code advances sequentially, regardless of the operation of the camera.
MAKE: Sets the time code to be recorded.
PrSet: The newly set-up time code is recorded on recording media.
REGEN: The last time code of the previous recording is read out from the recording media and the
new time code is recorded sequentially from the last time code.
BACK: Returns to the [TCSET] menu.
When selecting [UBSET]
PrSet: Sets the user bit.
Set four 2-digit numbers, then press the ENTER button.
The user bit can be selected within the following range.
00 00 00 00 - FF FF FF FF