Filter
Top Products
Press a button.
Eject the memory card.
Connect/disconnect a cable.
Insert/remove the battery pack.
[58] How to use Changing the Settings Camera settings
Resetting the settings
You can reset the settings to their defaults.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [RESET], then press the
ENTER button.
2. Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button
again.
The camera automatically restarts when resetting is complete.
To cancel resetting, press the NEXT button or PREV button while [SURE?] or [OK] is displayed to
select [CANCL], then press the ENTER button.
[59] How to use Viewing Viewing images on a TV
Viewing images on a TV
Connect the camera to a TV which has an HDMI terminal using a micro HDMI cable (sold separately).
Refer also to the instruction manuals of the TV.
1. Turn off both the camera and the TV.
2. Open the connector cover and connect the camera to the TV with the micro HDMI cable (sold
separately).
3. Turn on the TV and set the input of the TV to [HDMI input].
4. Press the NEXT button or PREV button on the camera to turn on.
5. Press the NEXT button or PREV button to display [PLAY], then press the ENTER button.
6. Press the NEXT button or PREV button to display the desired image to view, then press the ENTER
button.
Select the settings below.
[MP4]: MP4 movies
[PHOTO]: Still images
[4K30p]: XAVC S movie (FDR-X1000V only)
[4K30p] is displayed when NTSC is selected and [4K25p] is displayed when PAL is selected.