Filter
Top Products
Purchase it at a Sony service center.
You can operate only the following settings using the RMT-845 (sold separately). Other settings are
inoperable.
Initialize the time code.
When initializing the setting, the REC lamp lights in blue.
Start/stop recording.
[48] How to use Changing the Settings Camera settings
HDMI settings
Set the HDMI output signal.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [HDMI], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
RESOL: Sets the output resolution of the HDMI signal.
AUTO: Sets the HDMI resolution signal automatically.
2160p (FDR-X1000V only): Sets the HDMI resolution signal to 2160p.
1080p: Sets the HDMI resolution signal to 1080p.
1080i: Sets the HDMI resolution signal to 1080i.
720p: Sets the HDMI resolution signal to 720p.
BACK: Returns to the [HDMI] menu.
24/60: Sets the output HDMI signal frame rate.
60p: Output HDMI signal is 60p.
24p: Output HDMI signal is 24p.
BACK: Returns to the [24/60] menu.
*
Available only when in movie mode (not available when playback).
*
This setting is disabled when VMODE is set to a setting other than 1080 24p.
*
This setting is disabled when the HDMI resolution is set to a setting other than 1080.
TCOUT: Sends the time code or the user bit information to a device connected with HDMI.
ON: Sends the time code or user bit information.