Filter
Top Products
Chapter 4 Adjustments and Settings for Recording
4-20(E) Chapter 4 Adjustments and Settings for Recording
4-6 Setup Using the OPERATION Menu
The “?” mark will change back to the arrow
marker (c), and the new setting will be saved.
5 To set the values for another items, repeat steps 3
and 4.
6 To end menu operations, set the DISPLAY switch
to ON.
The menu display will disappear from the viewfinder
screen, and the status of items set to ON will be
displayed on the screen.
4-6-6 Setting up the Auto Iris
The AUTO IRIS page of the OPERATION menu is
used to set up items related to the auto iris.
1 Set the DISPLAY switch to MENU.
2 Rotate the MENU SEL knob/ENTER button to
display the AUTO IRIS page, and push the MENU
SEL knob/ENTER button.
AUTO IRIS page
The current setting of each item appears to the
right of the item.
Item Contents
WINDOW SEL Selects the auto iris windows
a)
(1 to 6).
OVERRIDE Sets the override to temporarily change
the reference value for brightness of
the automatic iris level (–99 (one step
to fully closed iris) to 99 (one step to
fully open iris))
a)The shaded parts in the illustrations below indicate the
area where light detection occurs.
4-6-5 Setting up the Viewfinder
The ZEBRA/VF DTL page of the OPERATION menu
is used to set up items related to the viewfinder.
Proceed as follows:
1 Set the DISPLAY switch to MENU.
2 Rotate the MENU SEL knob/ENTER button to
display the ZEBRA/VF DTL page, and push the
MENU SEL knob/ENTER button.
ZEBRA/VF DTL page
The current setting of each item appears to the
right of the item.
Item Contents
ZEBRA Sets zebra marker 1, zebra marker 2, or
both to ON or OFF.
ZEBRA1 Adjusts the 70% zebra marker (50 to
82%).
ZEBRA2 Adjusts the 100% zebra marker (88 to
112%).
VF DTL Turns the VF detail (sharpness of the
viewfinder picture) adjustment function
ON or OFF, and adjust the level
a)
(–99 to
+99)
a) The adjustment has no effect on recording pictures.
3 Rotate the MENU SEL knob/ENTER button to
align the arrow marker (c) with the item to be
changed, and push the MENU SEL knob/ENTER
button.
The arrow marker (c) will change into a “?” mark.
4 Rotate the MENU SEL knob/ENTER button to
change the setting to the desired value, and push
the MENU SEL knob/ENTER button.
<ZEBRA/VF DTL> 6
ZEBRA :
c
ON
: 1
ZEBRA1 : 70%
ZEBRA2 : 100%
VF DTL :( 0)
:( ON)
<AUTO IRIS> 7
WINDOW :
c
1
OVERRIDE : 0
12
34
6
5