Filter
Top Products
Chapter 4 Adjustments and Settings for Recording
4-26(E) Chapter 4 Adjustments and Settings for Recording
4-7 PAINT Menu
Page Setting item Allowable settings Description
LOW KEY SAT LEVEL –99 to 0 to 99 Sets the lower limit of the video level which the low key
saturation affects.
ON, OFF Turns the low key saturation function on or off.
KNEE POINT R,G,B,M –99 to 0 to 99 Sets the R, G, B, and master knee point level.
SLOPE R,G,B,M –99 to 0 to 99 Sets the R, G, B, and master knee slope level.
WHT CLP R,G,B,M –99 to 0 to 99 Sets the R, G, B, and master of the white clipping level.
KNEE SAT LEVEL –99 to 0 to 99 Sets the knee saturation level
KNEE ON, OFF Turns the knee correction circuit on or off.
KNEE SAT ON, OFF Turns the knee saturation function on or off.
WHT CLIP ON, OFF Turns the white clipping function on or off.
TEST 1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
DETAIL1 LEVEL –99 to 0 to 99 Sets the general level of the detail signal.
LIMITER –99 to 0 to 99 Sets the detail limiter.
M/WHT/BLK
CRISPEN –99 to 0 to 99 Sets the crispening level.
HV RATIO –99 to 0 to 99 Sets the level of V detail signals.
FREQ –99 to 0 to 99 Sets the frequency of the H detail signal.
DETAIL ON, OFF Turns the detail correction function on or off.
LVL DEP ON, OFF Turns the level depend function on or off.
–99 to 0 to 99 Sets the level depend.
DETAIL2 KNEE APERTURE –99 to 0 to 99 Sets the knee aperture level.
ON, OFF Turns the knee aperture function on or off.
SKIN DETAIL SKIN DTL ON, OFF Turns on or off the skin-tone detail function.
SKIN GATE ON, OFF Turn the zebra indication of the skin tone detail portion on or
off.
CH SW ON, OFF Turns each channel of the skin detail function on or off.
Channel 1 is fixed to ON.
GATE ON, OFF Turns each channel of the skin gate function on or off. Any
one of channels is set to on.
PHASE AUTO Sets automatically the region of each channel the skin detail
function affects.
0° to 359° Adjusts the center phase of the hue being processed by the
skin-tone detail function to each channel.
WIDTH 0° to 90° Adjusts the width of the hue being processed by the skin-tone
detail function to each channel.
SAT –99 to 0 to 99 Adjusts the saturation level of the hue being processed by the
skin-tone detail function to each channel.
LEVEL –99 to 0 to 99 Sets the skin tone detail amount to each channel.