Sony HDC-F950 Film Camera User Manual


 
Chapter 3 Preparations
3-4(E) Chapter 3 Preparations
3-3 Attaching a Lens
The procedure for attaching a lens to the camera is as
follows.
For information on handling lenses, refer to the lens’
operation manual.
1 Push the lens fixing lever upwards and remove the
lens mount cap from the lens mount.
2 Align the lens’ alignment pin with the notch in the
upper part of the lens mount and insert the lens into
the mount.
3 While supporting the lens, push the lens fixing
lever downwards to secure the lens.
4 Connect the lens cable to the LENS connector.
5 Secure the lens cable with the cable clamp.
1,3425