Filter
Top Products
101
Troubleshooting
Warning indicators and messages
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
Some symptoms you can fix by yourself. If
t
he pr
oblem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C: (or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p. 107).
• Connect the DC plug of the AC
Adaptor
to the DC IN jack of your
camcorder securely (p. 15).
C:06:ss
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
C:21:ss
• Moisture condensation has occurred.
Remove the cassette and leave your
camcorder for at least 1 hour, then re-
insert the cassette (p. 110).
C:22:ss
• Clean the head using a cleaning
cassette (optional) (p. 111).
C:31:ss / C:32:ss
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
(p. 110).
• Remove the power source. Reconnect it
and
operate your camcorder again.
• Change the cassette. Press the RESET
button (p. 119)
, and operate your
camcorder again.
E:61:ss / E:62:ss
• Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”
101-1001(Warning indicator
pertaining to files)
• The file is damaged.
• The file is unreadable (p. 107).
E (Battery level warning)
• The battery pack is nearly used up.
• Depending on the operating,
enviro
nment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
% (Moisture condensation warning)
• Eject the cassette, remove the power
source, and then leave it for about 1
hour with the cassette lid open (p. 110).
(Warning indicator pertaining to
“Memory Stick Duo”)
• A “Memory Stick Duo” is not inserted
(p. 23).
(Warning indicators pertaining to
“Memory Stick Duo” formatting)
• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not
format
ted correctly (p. 77, 106).
(Warning indicators pertaining to
unsupported “Memory Stick Duo”)
• A “Memory Stick Duo” that cannot be
used in your camcorder is inserted
(p. 106
).
Self-diagnosis display/Warning
indicators
Continued ,