Filter
Top Products
102
(Warning indicator
pertaining to battery pack
temperat
ure)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
(Warning indicator pertaining to
battery pack temperature)
• The battery pack is too cold. Replace
the battery pack, or remove it and put it
in a warm place.
Q (Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted.
• The write-protect tab on the cassette is
se
t to
lock (p. 105).
Fast flashing:
• The tape has run out.
Z (Eject cassette warning)
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 105).
Fast flashing:
• Moisture condensation has occurred
(p. 110).
• The self-diagnosis display code is
disp
layed (p. 101).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 106).
z Tips
• You will hear a beep when certain messages
appear on the screen.
If messages appear on the screen, follow the
instructions.
x Battery/Power
Cannot use this battery in the
camcorder. (
p. 107)
x Moisture condensation
%Z Moisture condensation. Eject
the cassette (
p. 110)
% Moisture condensation. Turn off
for 1H. (
p. 110)
x Cassette/Tape
Z Reinsert the cassette. (p. 23)
• Check if the cassette is damaged.
QZ The tape is locked - check the
tab. (
p. 105)
x “Memory Stick Duo”
Reinsert the Memory Stick.
(p. 23, 106)
• Reinsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo” might
be damaged. Try with another
“Memory Stick Duo.”
This Memory Stick is not
formatted correctly.
• Check the format, then format the
“Memory Stick Duo” as necessary
(p. 77, 106).
Description of warning messages
Warning indicators and messages (Continued)