Filter
Top Products
43
Recording/Playback
2 Press the ASSIGN button to
which [END SEARCH] is
assigned.
The last scene of the most recent
re
cor
ding will be played back for about
5 seconds, and the camcorder goes the
standby at the point where the last
recording has finished.
b Notes
• End search will not work once you eject the
tape.
• End search will not work correctly if a blank
section exists between recorded sections on the
tape.
You can store settings of focus, zoom, iris,
gain, shutter speed and white balance, and
smoothly shift from the current settings to
the stored settings (shot transition).
For example, you can shift the focus from
cl
oser
objects to farther objects, or change
the depth of field by adjusting the iris. You
can also develop scenes under different
conditions smoothly. If you store manually
adjusted settings of white balance, you can
smoothly shift from one scene to another
under different conditions, such as from
indoor to outdoor.
Sony recommends that you use a tripod to
av
oid
image blurring.
You can set the transition curve and
d
ur
ation using [SHOT TRANSITION]
(p. 68).
1 Assign [SHOT TRANSITION] to
the ASSIGN buttons (p. 41).
z Tips
• Shot transition is assigned to ASSIGN 4, 5
and 6 buttons.
Using the Shot transition
SHOT-A
SHOT-B
ASSIGN 4-6 buttons
Continued ,