Filter
Top Products
76
You can select [576i] or [1080i/576i]
depending on your TV when you connect
your camcorder to a TV via a component
A/V cable.
576i
Supports connection between your
camcorder and a TV with a component
input jack that supports the 576i format.
B1080i/576i
Supports connection between your
camcorder and a TV with a component
input jack that supports the 1080i format.
You can convert signals in HDV format to
DV format, and output pictures in DV
format from the HDV/DV interface
(i.LINK).
BOF
F
Outputs the pictures from the HDV/DV
interface (i.LINK) in accordance with the
sett
ings in [REC FORMAT] and [VCR
HDV/DV].
ON
Pictures in HDV format are converted to
DV format, and pictures in DV format are
output in DV format.
b Notes
• For input signal via an i.LINK connection, see
[VCR HDV/DV] (p. 74).
• Disconnect the i.LINK cable before setting
[i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize the
video signal from your camcorder.
You need to convert the signal depending
on a type of your TV when playing back the
picture. The recorded pictures are played
back as following illustrations.
B16
:9
Select to view your pictures on a 16:9
(wide) TV.
4:3
Select to view your pictures on a 4:3
standard TV.
b Notes
• This is not effective for the i.LINK output.
COMPONENT
i.LINK CONV
TV TYPE
HDV/DV (16:9)
format pictures
DV (4:3) format
pictures
HDV/DV (16:9)
format pictures
DV (4:3) format
pictures
Press the MENU button t select the (IN/OUT REC) with the SEL/PUSH EXEC dial.