Filter
Top Products
52
You can search scenes by recording dates.
1 Set the POWER switch to VCR.
2 Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [DATE
SEARCH].
3 Press the . (previous)/>
(next) button B on the Remote
Commander to select a recording
date.
You can select a date previous or next to
t
he da
te of the current tape position.
Playback automatically starts from the
s
cen
e recorded on the selected date.
To cancel the operation
Press the STOP button F on the Remote
Commander.
b Notes
• Each day of recording must be longer than 2
minutes. Your camcorder may not detect the
date if the recording of that date is short.
• The date search may not work properly if a
blank section
exists on the tape.
You can search scenes by indexes recorded
at the start of recording (p. 42).
1 Set the POWER switch to VCR.
2 Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [INDEX
SEARCH].
3 Press the . (previous)/>
(next) button B on the Remote
Commander to select an index
point.
You can select an index previous or next
t
o th
e index of the current tape position.
Playback automatically starts from the
sc
en
e marked by the index.
To cancel the operation
Press the STOP button F on the Remote
Commander.
b Notes
• Recording between indexes must be longer than
2 minutes. Your camcorder may not detect the
date if the recording between the indexes is
short.
• The index search may not work properly if a
blank section exists on the tape.
Searching for a scene by date of
recording (Date search)
Searching for a recording start
point (Index search)
Locating a scene on a tape (Continued)